Want to get the full service, Contact us for any of your Standalone, Factory EFI, Carburetor or CIS based tuning needs. Our Dyno Pack hub dyno will support most 2wd apps

 
20200922_174108[1].jpg

Dyno Tuning/Calibration -

Rates will be determined depending on style of ecu/ignition/fuel system being used. Base files/tunes will start at $300

3-6 baseline pulls for a consistent graph, No Tuning/software changes - $250

Labor rates ($150hr) will apply for additional repairs and hardware changes being made

20180211_010414[1].jpg

Before dyno tuning your engine for drivability purposes or all out power it is best to give it and the drivetrain a good once over. We can provide this service, regular labor rates will apply.

20190502_204502[1].jpg

Dyno Check List: *Check all fluid levels (engine, transmission, differentials) and fill tank with fuel your going to be using

*

nut and bolt check vehicle engine/transmission/drivetrain/brake/suspension

*Bring any wheel locks/keys or spacers

*Bring any handheld flash unit/laptop or any specific ecu cables/chargers

20170119_171652[1].jpg

It is also best to know some basic info about your setup. Modifications to the engine (rods, pistons, piston ring gap, bored, stroked, cams, springs, compression ratio) spark plugs brand/heat range and gap, fuel being used for tuning, base fuel psi